Trade counter open Mon to Fri, 09:00 to 17:00 · Tullamore, Co Offaly
24–48 hour delivery nationwide +353 (0)57 936 1062
Trade counter in Tullamore with wood stain samples, spray equipment and sundries
Shop tips · 7 min read

Colour matching that still matches on the second batch

A match is a formula plus a process. If the second batch is sprayed on a different primer, at a different sheen, or over a stain that was “close enough”, it will not look like the first door.

The spectrophotometer in Tullamore is not magic. It is a way to get a number from a sample so the Corob line can dispense a Lacquerite version of that colour into the system you named. Repeatability is a workshop habit as much as a machine habit.

Send something we can read

Good inputs:

  • A labelled chip, door, spray-out or fan-deck reference (RAL, NCS, BS, Pantone, Farrow & Ball, Colourtrend, Dulux)
  • The system — acid-cured, pre-catalysed, PU or waterborne
  • The sheen
  • Clear or pigmented, and the substrate

Bad inputs: a photo on a phone, “the grey we did last year”, a water-damaged chip with no back label. We can still try. You will own more of the risk.

Always check the paint before a full run. We say this on the colour matching page because it is the sentence that saves kitchens. Spray a panel. Look at it dry, in the light the client will use.

Store the code like it is a part number

When a match is approved, we keep the formula against a code. Put that code on the job bag, the CNC sheet and the reorder email. If you only send “the Savvy grey” two years later, we will get close and still argue.

If you change primer, insulator, stain or topcoat sheen, tell us. The colour sits in a film. Change the film, change the colour.

Where repeat matches matter most

Some jobs depend on a second batch matching more than others:

  • Kitchen re-sprays, where new doors sit next to panels that are not being sprayed. See the kitchen re-spray process.
  • Exterior joinery for the same house over several orders, tinted in Sikkens Rubbol Promatch. See coating exterior joinery before autumn.
  • Metalwork in RAL colours, where a gate made this year has to match railings made last year. See coating metal and plastic.
  • Stained timber, where the stain, the final sanding grade and the topcoat all move the colour. Match on the timber you will use, under the full system.

On white base topcoats, a 5 litre and a 1 litre tin tinted to the same colour may differ slightly. Order the job in one pack size where you can, and keep a little back for touch-ups.

What we will not promise

All dispensed colours are a Lacquerite version. An exact match to a third-party decorative paint still needs a sample. We cannot accept liability once paint has been applied — the disclaimer exists because timber, technique and sheen move the result after it leaves our mixer.

Reorders and top-ups

Order before the booth is empty. A matched colour mixed on a Wednesday for a Thursday spray should not be a surprise to the counter. See ordering paint so you do not run out.

If a batch looks off, stop after the sample panel. Call sales with the code and the batch on the tin. That is a solvable problem. Forty doors is not.

Questions from the counter

What should I bring to get a lacquer colour matched?

A labelled chip, door, spray-out or colour reference such as RAL, NCS, BS, Pantone, Farrow & Ball, Colourtrend or Dulux, plus the system, the sheen and whether the finish is clear or pigmented.

Will a 1 litre and a 5 litre tin of the same colour match?

On white base topcoats, a 5 litre and a 1 litre tin tinted to the same colour may differ slightly. Order the job in one pack size where you can.

Can Lacquerite match a decorative paint colour exactly?

All dispensed colours are a Lacquerite version in the lacquer system you spray. An exact match to a third-party decorative paint needs a physical sample, and you should always check a spray-out before a full run.

How do I reorder a matched colour?

Quote the Lacquerite colour code stored against the approved match, along with the system and sheen. Tell us if the primer, stain or sheen has changed.

Apply this on a job

Tell sales the system, sheen, colour and when you need it on the gun.

Get a trade quote

Open a trade account today.

Talk to our sales team about pricing, delivery and the right system for your work.